Homemade Pulk Sled

I’ve wanted to make a pulk sled for winter camping for a while now, so I decided making a pulk sled was next on my list of D.I.Y. projects. I was excited to find that my local Runnings store was running a sale on Jet Sled Jr’s so I grabbed two of them. I figured I’d make two sleds so that either, one of my sons could use one or my brother. I crafted brackets out of some steel stock I grabbed from the hardware store. After shaping the brackets and painting them, I mounted them on the front of the sled with stainless steel bolts and fasteners.

sled10.jpg

I added a fin, made from aluminum angle stock, on the rear bottom of the sled. I used galvanized fasteners to attach the fin. This helps with tracking in the snow especially when in hilly areas.

sled4.jpg

sled5.jpg

I used plastic electrical conduit for the poles that connect to the sled and a leather belt for pulling. I used two pieces of conduit because I wanted six foot poles. If I were to make the poles five feet instead of six feet I would have only needed one conduit. On one end of each pole I epoxied a tie rod end and the other end epoxied an eye bolt. Prior to adding epoxy, I heated up the conduit so that I could push the nut for the eye bolt and the nut for the tie rod end in, to make a more secure attachment. The tie rod end connects to the bracket on the sled using a locking pin.

sled8.jpg

sled7.jpg

The eye bolt on the other end of the poles connects to clevis pins which I mounted on either side of a leather belt I made. I put a washer on both sides of the belt before installing the clevis pin and then added a heavy bushing which fit perfectly inside the eye bolt and over the clevis pin. Lastly, I added a hitch pin to keep the eye bolt in place but to also make it easily removable once at camp.

sled13.jpg

sled11.jpg

sled12.jpg

sled3.jpg

All in all, I think this project went well and the pulk sleds turned out great. I can’t wait to get out and test my new pulk sled. This should make snowshoeing a bit easier without the extra weight from the pack on my back pushing down on the snowshoes. Do you winter camp or snowshoe? Have you ever used or thought about using a pulk sled for winter camping? Let me know in the comments section if you liked this D.I.Y. project and if you’d like to see more.

Sled 1.jpg

sled9.jpg

Testing Winter Gear

Over Thanksgiving the nighttime temps were supposed to be in the single digits here in NY, so even though I was visiting family I still wanted to test some of my winter gear. I didn’t get my 0-degree rated over quilt from Hammock Gear until spring, so I was never really able to give it a good test. I figured this would be the perfect time. All Temps listed in this article are in Fahrenheit.

pack.jpg

Everyone else thought I was nuts wanting to sleep outside in those temps but all I could think about was testing some of my gear and honestly, I love how quiet and peaceful it is outside during the colder months.

So, I setup my DD Hammocks Superlight tarp. I placed my UST heavy duty reusable emergency blanket on the ground as my ground cloth.  I placed a foam pad down and then placed my Klymit insulated static V on top of that. I knew with that combination I shouldn’t feel any cold from the ground down to at least -10 or so.  I laid my 0 degree over quilt out and ran the sleeping pad shock cords around the sleeping pads so that the over quilt would stay put on top of the pads. It’s a nice handy feature for ground camping with an over quilt. I laid may Pathfinder wool blanket over everything just to keep everything safe and dry during the day. I wanted the wool blanket just in case the over quilt didn’t keep me warm.

tarp6.jpg

tarp4.jpg

tarp2.jpg

The first night went well. It only got down to 11 degrees overnight. I stayed warm all night. The only issue I had was that in the middle of the night the wind changed from blowing on the sides and back of the tarp to blowing right through the door opening. Since I had the wool blanket, I just threw it over top of everything to keep the wind from blowing in any holes between the sleeping pads and over quilt. The wool blanket did the trick. After waking up and remedying the wind issue I slept soundly the rest of the night. Since the temps never reached very low, I really didn’t view this night as much of a test.

The next night got down to 4 degrees overnight and I stayed toasty warm all night long. I even slept in until around 9:30 am so I’d say that was a success. Based on how warm I stayed I’m confident that this setup can get me down to at least -10 to -20. I think I can most likely get away with just the Klymit sleeping pad down to 0 degrees. I think the two pads together was overkill but who doesn’t like extra padding when ground camping?!

temp.jpg

me.jpg

 

muchboots.jpg

I’m looking forward to doing some more testing and fine tuning of my winter gear. Eventually I’m hoping to get up into the Adirondacks for some winter camping this coming winter. One thing I didn’t like about my setup was the tarp configuration. It looks neat and all but it’s a pain getting in and out off, not roomy at all and since it’s so tight inside, condensation that builds up overnight is constantly getting on clothing and bedding because its impossible to move around without touching the tarp. I’m just not a fan of this tarp configuration. I’d go with something a little roomier so that I’m able to move around with ease without worry of touching the tarp “walls”. This is in no way a reflection on the tarp. I like this tarp a lot.

What does your winter kit look like? What pieces of winter gear are a must have for you? What winter gear are you testing for the first time this winter? What are the lowest temps you’ve camped in so far? Thanks for reading and please let me know what your thoughts are on winter camping or if you have any great winter camping stories to share. Be safe out there and enjoy each changing season.